65
6. I can’t connect my multimedia
speakers to my DJControl Inpulse
300 MK2.
If your speakers’ connectors differ from the connectors
on the DJControl Inpulse 300 MK2, you can use a dual
RCA to 1/8” / 3.5 mm mini-jack adapter (not included) or
any other adapter format corresponding to your
speakers.
You can also connect your speakers to the headphones
output and route output 1-2 to output 3-4 by pressing the
MASTER button.
7. Is the DJControl Inpulse 300 MK2
controller compatible with an iPad
or iPhone?
No, the DJControl Inpulse 300 MK2 controller is not
compatible with an iPad or iPhone. It only works with a
PC or Mac.
To Next Page
Loading...
Need help?
General
