DJSPEAKER 32 SMART
10/15 – User Manual
3. USING THE DJSPEAKER 32 SMART SPEAKER KIT
1. Plug your speaker kit’s power cable (4) into an electrical outlet.
2. Set the On/Off switch (3) to ON.
3. Connect the audio source that you would like to use (PC, Mac®, television set, DVD player) to the RCA input (5)
using the required cable(s), and then power on the audio source.
or
3. Follow the procedures set out in section 2.3 in order to connect your devices (smartphone, tablet) via the
Bluetooth® function.
Please note: The two inputs — RCA (5) and Bluetooth® (10) — are mixed, which means that you don’t need to
unplug/disconnect them in order to choose one or the other.
4. Adjust the master volume (8).
To Next Page
Loading...
