HermanMiller Mirra Adjustment Guide

HermanMiller Mirra
®
Chair Adjustment Guide1
Seating that
performs for you.
HermanMiller
Mirra
®
Chair
FlexFront
®
Seat Depth: Handle under front of seat
Seat Height: Lower right side of seat
To raise:
Take your weight o chair, li tab up.
To lower:
Li tab up while seated.
At the proper height, your feet should rest flat on the floor.
To adjust:
Squeeze handle and adjust seat edge
up or down. Release handle to lock in
position.
In the proper position, you will have approximately three-ngers of clearance
between the back of your knees and the seat edge.
Forward Tilt: Horizontal tab on le front side of seat
Harmonic
™
Tilt Tension: Knob below right front side of seat
Only available on some models.
To increase:
Turn knob clockwise.
To decrease:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when reclining.
To engage:
Recline and flip lever down.
To release:
Recline and flip lever up.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks, such as keyboarding.

HermanMiller Mirra Specifications

General

Chair Type	Office Chair
Armrests	Adjustable
Weight Capacity	350 lbs
Tilt Limiter	Yes
Tilt Tension Control	Yes
Seat Depth Adjustment	Yes
Material	Steel
Seat Height	16" - 20.5"
Warranty	12-year
Back Material	Polymer
Adjustability	Height, Seat Depth, Armrests
Seat Depth	15.75" - 18.5" (adjustable)
Back Support	Lumbar Support (adjustable)
Base	5-star base, typically aluminum or composite
Casters	Carpet casters or hard floor casters available