HermanMiller Mora System Overhead Storage - Step 3: Drill and Anchor Cleat; Step 4: Mount Cabinet to Cleat

Step 4
Step 3
. Drill /” hole at each marked location. Make sure there are no utilities
present.
. Insert Wall anchors and secure. Orient toggles vertically.
. Mount cabinet onto wall cleat. Mate cabinet cleat with wall cleat.
Wall Cleat
Cabinet Cleat
Cabinet
/” Hole
Wall Anchor
. Place cleat on wall. Insert screws with #-/” flat washer provided
with wall anchor. If screw hole aligns with wall stud, use /” Toggle
Attachment.
Note: If utilities or other obstructions prevent anchor installation, create
new location in cleat with appropriate drills as close to original location as
possible.
Wall Cleat
Mounting Screws
Wall Stud
/” Toggle Attachment
Supplied with Toggle
. Arrange cases in proper location in run.
. Make sure cases mate tight together.
HermanMiller for Healthcare Assembly Instructions2
1BJM4F rev D