HERO HUNK - Tyre Pressure and Inspection; Recommended Tyre Pressures; Tyre Inspection and Wear Indicators

21
The recommended “cold” tyre pressures are:
Front
Rear
2
2.00 kg/cm (29 psi)
2
2.00 kg/cm (29 psi)
2
2.00 kg/cm (29 psi)
2
2.25 kg/cm (33 psi)
Rider only Rider and Pillion
Over inflation / Under inflation will affect
the performance.
CAUTION
Cuts, splits or cracks in the tyre. Replace
the tyre if you can see fabric or cord.
Excessive tread wear.
Minimum tread depth Front: 1.5 mm
Look for :
Bumps or bulges in the side of the tyre
or the tread. Replace the tyre if you find
any bumps or bulges.
Carefully inspect the tyres for any
damage, if the motorcycle hits a
pothole or hard object.
Tread Wear
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are :
Rear: 2.0 mm
Check the tread wear indicator for tyre wear.
1
(1) Tyre pressure gauge
Inspection
Whenever you check the tyre pressure,
you should also examine tyre treads & side
walls for wear, damage & foreign objects:
(1) Tyre wear indicator (2) Arrow mark