24
11. Fitting & Fasteners - check & tighten
if necessary.
12. Steering - check for smooth action and
for easy maneuverability.
11. Air Suction Valve - make sure all tube
connections are secured properly (page
57).
7. Drive Chain - check condition and
slackness (page 41-44). Lubricate if
necessary.
8. Throttle - check for smooth opening
and closing in all steering positions
(page 36-37).
9. Lamps and Horn - check that
headlamp, position lamps, tail / stop
lamp, turn signal lamps and horn
function properly.
10. Rear View Mirror - ensure that the
rear view mirror gives a good rear view
when you are sitting on the motorcycle.
6. Clutch - check for smooth operation.
Adjust free play (page 40-41).
1. Engine Oil Level - check and top up
engine oil if required (page 18). Check
for leaks.
2. Fuel Level - ensure sufficient fuel is
available in the fuel tank for your
journey (page 16). Check for leaks.
3. Front Brake - check for correct brake
fluid level in master cylinder (page 44).
4. Rear Brake (Disc type) - check for
correct brake fluid level in the reservoir
(page 46-47).
5. Tyres - check condition and pressure
(page 20-21)
To Next Page
Loading...
