EasyManua.ls Logo

HERO HUNK - Riding and Engine Operation; Riding Procedure

HERO HUNK
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This sequence is repeated progressively
rd th th
to shift to 3 , 4 and 5 gear.
While the engine is idling, press the
clutch lever and depress the gearshift
pedal downwards using the toe to shift
st
into 1 gear.
When the motorcycle attains a
moderate speed, close the throttle, press
nd
the clutch lever and shift to 2 gear by
lifting the gear pedal upwards using the
toe.
26
If the engine fails to start after repeated
attempts, it may be flooded with excess fuel.
To clear a flooded engine, turn the ignition
switch “OFF and move choke lever fully
upwards to “OFFposition. Open the throttle
fully and crank the engine with the starter
switch. Turn the ignition switch ONand
start engine with the choke lever in "OFF"
position.
Helps to assure your motorcycle's future
reliability and performance by paying
extra attention to how you ride during the
first 500 kms.
During this period, avoid full-throttle
operation and rapid acceleration.
2
3
4
N
1
5
Do not shift gears without operating clutch
and without closing the throttle otherwise
this would lead to damage of gears.

Related product manuals