Hertz H8 DSP User Manual (English)

Need help?

Do you have a question about the Hertz H8 DSP and is the answer not in the manual?

Hertz H8 DSP Specifications

General

Brand	Hertz
Model	H8 DSP
Category	Processor
Language	English

Summary

4. CONNECTION PANELS – DESCRIPTION

4.2 INPUT SIGNALS

4.4 INPUTS – REMOTE CONTROL OUTPUTS AND POWER SUPPLY

Details power supply connections and remote turn-on functionality.

4.5 CONTROLS AND SETTINGS

1. IN level: Input signals adjustments.

5 CONNECTIONS

5.1 POWER SUPPLY AND REMOTE TURN ON

Details power connection and remote turn-on functionality.

5.2 HOW TO TURN THE H8 DSP ON / OFF

Explains various methods to turn the H8 DSP device on and off.

5.3 PERSONAL COMPUTER AND DIGITAL REMOTE CONTROL (DRC)

5.7 OUTPUT SIGNALS

6. HOW TO SETUP THE H8 DSP WITHOUT A PC

6.1 HOW TO CALIBRATE THE MASTER FRONT-REAR INPUT SENSITIVITY

Calibrates master front-rear input sensitivity without PC.

6.2 SOURCE DE-EQUALIZATION

Verifies and eliminates existing source equalization.

1. Equalization analysis: source set up.

2. De-equalization analysis: H8 DSP set up.

Configures the H8 DSP for de-equalization analysis.

6.3 AMPLIFIERS SENSITIVITY CALIBRATION

1. Amplifiers sensitivity calibration by listening.

Calibrates amplifier sensitivity by listening to audio output.

2. Amplifiers sensitivity instrument calibration.

Calibrates amplifier sensitivity using an oscilloscope.

6.4 HOW TO CALIBRATE THE AUX IN INPUT SENSITIVITIES

7. H8 DSP SOFTWARE AND DRIVERS INSTALLATION / UNINSTALLATION GUIDE

7.1 PC SOFTWARE INSTALLATION GUIDE

Step-by-step guide for installing the H8 DSP PC software.

7.2 DRIVERS INSTALLATION GUIDE

7.3 H8 DSP SOFTWARE UNINSTALL

8. H8 DSP INSTALLATION GUIDE USING A PC.

8.1 SELECTING THE MASTER (FRONT / REAR) INPUTS AND OUTPUTS - TARGET MODE

Guides selecting master inputs/outputs and target mode via PC software.

6. Inputs Selection.

7. Master high-level main inputs configuration.

8. Source Setting.

9. H8 DSP in Level inputs calibration.

Calibrates H8 DSP input levels for optimal acoustic results.

10. Integrated speakers selection

11. Speaker groups passive crossover selection.

12. Processor PRE OUT outputs (Ch1÷Ch8) allocation.

13. Source equalization analysis.

Analyzes source equalization and its potential elimination.

14. Equalization analysis: source setting.

16. Source de-equalization.

Performs source de-equalization to eliminate harmful equalization.

17. De -equalization procedure.

20. Software Startup

21. Amplifiers sensitivity calibration.

Calibrates amplifier sensitivity for optimal acoustic results.

8.2 OFFLINE MODE

8.3 ADJUSTING ACOUSTIC REPRODUCTION

8.5 "FILE" MAIN MENU

2. Save Setup:

3. FINALIZE to H8 DSP:

4 Synchronize: PC -> H8 DSP, PC <- H8 DSP

8. Update Firmware:

Updates the H8 DSP firmware.

10. Restore Factory Defaults:

8.6 "CONFIG" MAIN MENU

1. I/O Configuration Wizard:

Enables system calibration and H8 DSP function setup.

2. Working Mode - Standard / Expert:

8.8 CHANNEL MAP

8.9 SELECT CHANNEL

8.10 FILTER SETTINGS

1. Xover L/R Link:

2. Invert Phase:

3. Filter Type:

4. Filter Model:

5. Cut-off frequencies

Sets up band frequencies for Band-Pass filters.

6. Filter slope

Sets the slope for filters (12/24 dB/Oct for Linkwitz, 6/12/18/24 dB/Oct for Butterworth).

Hertz H8 DSP User Manual

Table of Contents