4
The BMS-2 is available in 2 standard models:
• BMS-2-VC
• BMS-2-PWM
Both models are equipped with speed control
functions, ramp functionality, interlocking operator
commands, dead man and hold functions, and
optional feedback and cable back-up.
Power can be supplied using 12 or 24 VDC.
For information regarding your transmitter, see your
transmitter documentation that was provided with
your system.
For a complete list of standard model features, see
the following Standard Features list.
S
TANDARD FEATURES (VC AND PWM MODELS)
• 1 Stop output
• 1Safety Valve Output
• 11 hardwired digital outputs
• Expansion of up to 16 additional digital
outputs
• 6 Digital Inputs
• CAN Interface for Control and Feedback
• RS-232 interface for back up cable control
and programming
• Expanded Self-diagnostics with 3-Segment
LED Display
• Back-up Cable Control Interface with Sure
Seal Connector
• 12-24Vdc supply power for DC applications
• Built-in Hetronic 70 pin quick disconnect
connector
• External antenna
BMS-2 VC S
TANDARD MODEL ONLY
• 8 Analog Outputs
• 8 Switching Outputs for Valve Power Supply
• 8 Error Inputs for Sauer-Danfoss Valve
BMS-2 PWM S
TANDARD MODEL ONLY
• 8x2 PWM Outputs
To Next Page
Loading...
