Why does my Hettich EBA 200 S Laboratory Equipment show 'IMBALANCE'?
The 'IMBALANCE' error on your Hettich Laboratory Equipment typically means the rotor isn't evenly loaded. To resolve this, open the lid, check the rotor loading, and then repeat the centrifugation run.
How to fix no display on Hettich EBA 200 S?
If your Hettich Laboratory Equipment has no display, the issue could be due to no power or defective mains input fuses. Check the supply voltage and the mains input fuses. Also, verify that the mains switch is in the [I] position.
What to do if my Hettich EBA 200 S Laboratory Equipment shows an IMBALANCE error?
If you see an IMBALANCE error on your Hettich Laboratory Equipment, it means the rotor is unevenly loaded. To resolve this, open the lid, check the loading of the rotor to ensure it is balanced, and then repeat the centrifugation run.
Why does no error number appear on the display of my Hettich Laboratory Equipment?
If no error number appears on the display of your Hettich Laboratory Equipment, it could be due to no power or defective mains input fuses. Check the supply voltage and the mains input fuses. Also, ensure that the mains switch is in the [I] position.
General| Capacity | 4 x 100 ml |
|---|---|
| Weight | Approx. 20 kg |
| Type | Centrifuge |
| Max Speed | 20000 rpm |
| Max RCF | 30, 000 x g |
| Max. Speed | 6, 000 min-1 |
| Max. RCF | 3, 461 |
| Power consumption | 0.75 kW |
| Timer | 1 - 99 min |
| Power Supply | 230 V, 50/60 Hz |
To Next Page
