2.Installation Instruction
2.1. Ensure to check all parts are present:
a. Spa pool
b. PU cover with foil and zipper
c. Inflation hose
d. Filter cartridge and fabric cover
e. Drain plug
f. Repair kit
g. Ground cloth
2.2. Site requirements:
2.3. Site requirements:
Warning 1: The floor must be able to easily support the weight of the filled and occupied hot tub.
Warning 2: The floor must not be sensitive to water or moisture and there must be a suitable drainage system. Liability is excluded for leaking or over-
flowing water.
Page 5/26 17.12.20
To Next Page
Loading...