CHUCK Bolting Data Processor
Operations Manual
CHUCK and all materials within copyright HEX TECHNOLOGY (2021) 5
Setting Up CHUCK’s Software
For the following steps, you will need a Wi-Fi enabled laptop.
You should have received an email (Subject line: “CHUCK License Key”) with a license key for
your new CHUCK application. Make sure you have that email handy on your laptop before you
connect to CHUCK. The license key will look like…
key/eyJleHBpcmF0aW9uRGF0ZSI6IjIwMjItMDEtMjEiLCJzZXJpYWxOdW1iZXIiOiIxMDEifQ==.KS1dSXrsDcnKRBmdDReLo1ChZX9Y/2vbkOQvpQ3
7ZM3T5o5soXmLQgcPQCtpHYwxDuR2BzAHDIDSXCaHpxSJXmeUAEqjE5iBYUPVh3SDmVFpqUwe8A9Rfm4Qj2Zp14QAOanpuHqrYYX2fsHdZhV
XOK1cAHTNJswxQZJCStEj1iVDhnust9oLnzvVbseRkXZ/C/k52nQVNbsgF/dg+ub2xoe0oWd552guCzABh2BDD/stYk/UwDmt+W98ITF9eY1cJRQY
3ly/3cAKR5/Uu5ujSX2X8b6ZK0lbiUgaY9+6+q5NWk73dpICjiUtyi1UxKvKTeITwsdu4u7LJsMsojV4WA==
Connect to CHUCK
1. Connect your laptop to Chuck:
a. Find the label attached to the underside of the CHUCK Brain with the WiFi
Network ID and password.
b. From your laptop’s wi-fi selector (or the “Network Preferences”), look for the
CHUCK wireless network.
c. To connect, enter the WiFi password.
2. Open your internet browser.
3. Type “http://chuck/” into the navigation bar.
a. Note: On some computers and browsers, you won’t need to type the “
http://”.
b. Some computers and browsers will think you are searching for a friend named
“Chuck.” If you have that problem, key in the Server IP address
(http://192.168.4.1) into the navigation bar.
c. You will arrive at CHUCK’s user interface and see a Welcome message:
To Next Page
Loading...