Hexagon ROMER Absolute Arm - Other Safety Care and Usage Notices

ROMER Absolute Arm presentation
ROMER ABSOLUTE ARM Manual V2.3.1 (29/05/2012) 9
A
Other safety care
WARNING
Power supply parts
Risk of electric shock!
 Do not attempt to service or open DC power supply
 Do not short-circuit the power supply
 Do not use if cable is visibly damaged or insulation is worn
 Do not plug any other power supply into the arm power jack
WARNING
Transport
Risk of body injury!
 Use proper posture when lifting the arm from the case, placing the arm in the case, or
moving the case
CAUTION
Non-Contact Probe : Laser Guide Product Class 2M
Risk of eye injury!
 Do not stare into laser guide beam or view directly with optical instruments
WARNING
Mounting Screw handling : cutting threading
Risk of body injury!
 Do not hold the threading when handling the base for installation, moving
the base, or placing the base in the case
NOTICE
Arm use
Components deterioration
 Do not switch on ROMER ABSOLUTE ARM when covers have been removed
 Do not use outdoors
 Do not remove any axis covers
 Do not cut or twist any cable
 Always carefully plug and unplug each connector
 When using the arm, always pay attention to obstacles that may damage the device
 Do not store the arm, computer, or case in a place where there is risk of:
Significant heat or cold
Significant moisture
Electromagnetic or vibratory disturbance