Hi-Link HLK-WR02 - Submitting Alteration; Function Description

Shenzhen Hi-Link Electronic Co.,Ltd
http://www.hlktech.comTel:+86 0755-83575155 Fax+86 0755-83575189
20
Serial Configure：Serial configuration.fomat：Baud rate, data bits, parity bit, stop bit.
For example：“115200,8,n,1”.
Serial Framing Lenth：The Lenth of Serial Framing
Serial Framing Timeout：The time of Serial Framing
Network Mode：choose Client、Server or none。
Remote Server Domain/IP：Remote Server Domain/IP address
For exmpale：192.168.11.245 or www.hlktech.com .
Locale/Remote Port Number：The specified parameter is not the same under the
different network modes. Client specifies the port number on the remote, Server
specified local port number.
Network Protocol：Use tcp or udp Protocol
Network Timeout：Under the server network mode, no data transmission within the
timeout period, the connection will be disconnected. 0 specifies never disconnected.
5.5 Submitting Alteration
Click the button ‘Apply’ to submit the configuration of the current page. If some
parameters of the network have changed, the submission process may take about 25
seconds. If you only modify the serial functional configuration, the submission process
will be completed soon.
Click the button ‘Cancel’ to reload the page, the modified configuration will be lost.
6 Function Description
The module can be divided into four major modes： default mode， serial to
Ethernet,serial to WIFI CLIENT and serial to WIFI AP.