Shenzhen Hi-Link Electronic Co.,Ltd
http://www.hlktech.comTel:+86 0755-83575155 Fax+86 0755-83575189
24
the serial end sent to TCP Clien end
TCP Client
Fig6.4.2..TCP Client
In this mode, the module is connected to the specified domain / IP port. All the data
sent from the TCP Server-side end will be sent directly to the serial port, the data from
the serial end sent to the TCP Server-side. Abnormal network disconnect will cause the
module active reconnect. TCP Active reconnection function enable, TCP Server initiative
disconnected, the module will immediately take the initiative to reconnect, and otherwise
the module will not reconnect.
UDP Server
Fig6.4.3.UDP Server
In this mode, the module opens the local designated port, once received the data
sent to the port, the module will send the data to the serial port, and record the remote ip,
port. The module will record only the last information on the remote connection. Serial
received data will be sent directly to the recorded remote ip, port.
HLK-RM04
UDP Server
To Next Page
Loading...
Need help?
General