Shenzhen Hi-Link Electronic Co.,Ltd
http://www.hlktech.comTel:+86 0755-83575155 Fax+86 0755-83575189
30
set the network to active network model introdunced in section 5.1 , keep the equipment
online for a long time . In case the uart software in the original user on the server side can
real-time inspection to the existence of the uart equipment.
Reference setting (Take sensor as an example)
Networking Setting
IP address：192.168.2.X
Mask：255.255.255.0
Gateway：192.168.2.1
DNS：192.168.2.1
Operation mode setting
Start Automatic operation mode
Protocol Type：TCP
C/S mode：server
Port No.
:
60000
Time Out：120
To Next Page
Loading...
Need help?
General