November 2014 PLT-01277, Version: 1.2
Page 3-13 Printer Preferences
Group or Field Description
Overlay / Print Areas
To define an overlay or print area, select that option in the overlay / print field.
• Full Card: Select this option to overlay and/or print the entire card.
• Defined Area(s): Select this option to overlay and/or print only in the
selected and defined area(s).
• Undefined Area(s): Select this option to overlay and/or print in the space
outside the selected and defined area.
• Omit Smart Chip Area: Select this option to overlay and/or print only in
the space outside the standard location of a smart chip.
• Omit Mag Strip Area: Select this option to overlay and/or print only in the
space outside the standard location of an ISO-standard magnetic stripe.
• Omit Signature Area: Select this option to overlay and/or print only in the
space outside the standard location of a signature panel.
See Section 3.6.1: Defining an Overlay or Print Area
For Print and Overlay
This option applies the defined area to both the print and overlay processes.
For Overlay Only
The defined area applies only to the overlay process. The entire card prints and
only the overlay is affected.
For Print Only
(No Overlay)
The defined are applies only to the print process. Overlay is disabled.
Security Options
Visual Security
Solutions™
Use this field to enable and select a visual security option. The default value for
all cards is No Visual Security.
When one of the options is selected, the overlay/print area feature is disabled
and the security options become selectable. See Section 3.6.4: Visual Security
Solutions.
Verimark
This option is reserved for future use.
HoloMark
Use this option for hologram security.
To Next Page
Loading...
