November 2014 PLT-01277, Version: 1.2
Page 3-15 Printer Preferences
3.6.2 Defining additional areas
1. After the first area is defined, select 2 in the Defined Areas spin box.
2. The second area begins again at the 0,0 location.
3. Click and drag to enlarge the area and move it to the preferred location on the card.
4. This procedure can be done up to the five area limit.
3.6.3 Deleting a Defined Area
To delete one or more defined areas:
1. Select the area to be deleted.
2. Click Delete.
To Next Page
Loading...
