To Next Page
Z
zfisherSep 14, 2025
What does '# 2 Head Move Error' mean on my HID Printer?
- AApril LloydSep 14, 2025
The printhead lift has malfunctioned. Reset the printer and try again. If this problem persists, call for technical assistance.
What does '# 2 Head Move Error' mean on my HID Printer?
The printhead lift has malfunctioned. Reset the printer and try again. If this problem persists, call for technical assistance.
What does '# 112 Card Jam/Align error' mean on my HID Printer and how to fix it?
A card is jammed in the print station or card flipping area of the Printer. Clear the jam and press the Pause button to continue.
What does '# 110 Card Jam/Align error' mean on my HID Printer?
A card is jammed in the print station or card flipping area of the printer. To fix this, clear the jam and press the Pause button to continue.
What to do if my HID Printer says '# 91 Ribbon Out'?
The print ribbon has run out. Install a new ribbon. Press the Pause button to continue printing, or the ON/OFF button to cancel the print job.
What to do if my HID Printer shows '# 93 Wrong Ribbon' error?
The print ribbon installed in the printer does not match the ribbon type selected in the printer driver. To resolve this, either change the installed print ribbon to match the driver settings, or adjust the ribbon type selected in the printer driver. Press the Pause button to continue or the ON/OFF button to cancel.
What to do if my HID Printer says '# 139 Please Remove Ribbon'?
Ribbon needs to be removed. Reset the printer and retry. If problem persists, call for technical assistance.
What does '# 45 No Flip Module installed' mean on my HID Printer?
Request to print on 2nd side of card, but no flipper is installed. If a Flipper Module is present, ensure that the Print Both Sides option in the printer driver is set correctly. Install a flipper module.
What does '# 106 Job Data Error' mean on my HID Printer?
The print data sent to the printer is corrupt or has been interrupted. Check the interface cable. Select the ON/OFF button to cancel this print job and then resend the job.
What causes '# 109 # 113 Ribbon Release Error' on my HID Printer?
The printer cannot locate the next ribbon panel in order to release the ribbon from the card. Ensure that the ribbon is not stuck to the card. Replace the ribbon. Recalibrate the ribbon sensor. If the ribbon is broken, repair by taping the ribbon back onto the take- up core and manually advance to the next panel. Press the Pause button to continue.
What to do if my HID Printer says '# 25 Ribbon not Installed'?
No ribbon is installed in the printer. Install a ribbon and retry.
General