Section 3 - Bale Mover Preparation
3.0 BALE MOVER PREPARATION
1. Park the tractor and Bale Mover on level
ground.
- Engage the tractor parking brake.
2. Ensure that all decals are clean and in
place.
3. Ensure that the Slow Moving Vehicle
(SMV) sign is clean and visible.
4. Adjust the bed chain rails for the size of
bale.
- The inside rails can be moved for the
size of bale being handled.
- Remove the bolts (1) from the rail
mounts plates along the length of the
rail.
- Slide the rail to the alternate mount
position (2) to suit the size of bale
being handled.
- Fasten the mount plates with the bolts
and nuts.
Adjust Rails for Size of Bale
211020
Page 3-1
To Next Page
Loading...
