Section 3 - Bale Mover Preparation
13. Inspect All the Hydraulic Motors,
Cylinders and Hoses
Use a piece of cardboard or
heavy paper to check for leaks.
Do not use your hand. Wear
proper hand and eye protection
when searching for leaks.
Relieve pressure on hydraulic
system before repairing, adjusting
or disconnecting.
Note: If fluid is injected under the skin, it
must be removed immediately by a
surgeon familiar with this type of
injury.
- Visually inspect all the hydraulic hoses
and fittings.
- See Section 5 "Maintaining the
Bale Mover" for conditions
indicating that replacement is
needed.
- Ensure the proper size cylinder pins
are in place and secured.
Check All Hydraulic Connections
211045
Page 3-6
To Next Page
Loading...
