GENERAL DESCRIPTION OF THE BALE MOVER
The Bale Mover is designed to pick up round bales while driving in the field without the need to
stop to pick up a bale.
The bale pickup fork is lowered and positioned by the tractor driver to slide around the lower
portion of the bale. The pickup fork is raised for the bale to be placed on the bale rail. The
chains on the rail moves the bale back to give room for another bale to be loaded. Seven round
bales can be loaded on both the left and right side of the machine. This gives the bale mover
the capacity of loading and moving 14 round bales.
The Bale Mover has 90 degree turn bale forks to automatically turn bales for non-stop loading
from virtually any angle. Bales can be picked up from the left side and the right side of the
machine without having to reposition the machine. The forks can be adjusted for different sizes
of round bales.
For unloading bales, the back end of the bed of the bale mover is lowered. As the Bale Mover
is driven forward, the bale chains are rotated to assist in the easy unloading of the row of bales.
A row of bales can also be loaded onto the Bale Mover by lowering the back end of the bed,
rotating the bale chains to move bales onto the bed while backing the Bale Mover into the row
of bales.
When the Bale Mover is engaged it uses hydraulic power from the tractor to lower and raise the
bale fork. The hydraulics are also used to operate the bale chains to move the bales. The bed
is raised or lowered using the tractor hydraulics.
The operator of the Bale Mover is located in the tractor cab where they drive the tractor, control
the speed of driving and the operation of the bale forks and the bale chains.
The Bale Mover is transported with the Bale forks lifted and locked in position. The Bale Mover
is transported on the wheels of the Bale Mover.
INTENDED USE OF THE BALE MOVER
• The Bale Mover is designed to pick up round bales that are in the field and move them to
a storage location where they are placed in rows.
• The Bale Mover is designed to pick up round bales that have been previously placed in a
row and move them to another location.
• The bales have previously been baled using a round baler.
The Bale Mover is intended for use in field farming applications.
The Bale Mover is intended for use in locations that are not near people or animals who could
be harmed by the movement of the bale loading forks or the unloading of bales from the bed.
To Next Page
Loading...
