HighLine RCH Mower - Connecting Safety Chain and 2-Point Hitch

Section 2 - Transporting the Mower
Page 2-3
5. Connect the Safety Chain to the tractor.
- Ensure the safety chain rating is equal
or greater than the gross weight of the
mower.
- Route the safety chain (1) through the
large slot (2) in the drawbar connector.
Securely fasten the chain to the tractor
and lock in place with the hook lock.
6. Connect the 2 Point Hitch (if applicable)
- Adjust the lift links so that the PTO is
relatively level.
- Insert the 2 point hitch pins into the
hitch member and fasten in place with
D-ring pins.
7. Tractor Wheel Tread Width Settings
- Increase the tractor rear wheel widths
to maintain tractor stability when
working on inclines or rough ground.
8. Route the hydraulic hoses and wiring
harness through the hose support arm.
Connect the Safety Chain
108006C
2 Point Hitch Connection
108007