Section 3 - Mower Preparation
Page 3-1
Inspect Blades & Hardware
107034
3.0 MOWER PREPARATION
1. Park the tractor and mower on level
ground.
- Engage the tractor parking brake.
2. Ensure that all Decals are clean and in
place.
3. Ensure that the Slow Moving Vehicle
(SMV) sign is clean and visible.
4. Ensure the Lighting is working properly.
5. Check the Condition of the Blade Pans
Securely block-up the mower
before any work is done under the
mower when lifted up. This is to
prevent the mower from dropping
due to inadvertent operation of
controls, hydraulic leaking or
failure of any components.
- Clean debris and material buildup
from the blade pan area and from the
pans.
- Check that no wire or other materials
are wrapped around the driveshaft or
pan.
- Inspect the pan for damage caused by
contact with an immovable object.
- Inspect blade pan mounting hardware
for damage.
- Inspect blade mounting bolts for
damage.
Park On Level Ground
108084
To Next Page
Loading...