Section 7 - Troubleshooting
Page 7-6
Driveline Clutches
Symptom Problem Solution
Overheating Clutch slipping Check for jammed blade or
foreign object preventing
turning of blade pan
Friction plates worn Replace plates
Excessive ground speed in
heavy conditions
Reduce ground speed
Excessive hitting of ground
with blades
Increase cutting height
Seized Prolonged storage in damp
conditions
Inspect clutch lining . Free
up clutch. Refer to
“Replacing the Clutch
Friction Discs” in the
“Maintaining the Mower”
Section
Excessive Clutch Slippage Clutch discs worn or plates
warped
Replace discs. Use Highline
parts.
Blades hitting ground Increase cutting height
Oil on friction plate Replace friction plate. Refer
to “Replacing the Clutch
Friction Discs” In
Maintaining the Mower
Section. Use Highline parts
Friction Plate face is glazed Run-in the clutch. Refer to
”Run-In of the Friction
Clutch” in Maintaining the
Mower section
To Next Page
Loading...