After selecting this mode, the volume icon will change to the Bluetooth transmission
icon【 】, and the volume cannot be adjusted on this device, so the volume must
be adjusted on the original car.
③【FM】: After selecting this mode, the FM transmission mode will be turned on by
default. For example, if the device's FM transmit band is tuned to FM 106.0 MHz (any
unoccupied channel can be used), the car radio will also tune its receive band to the
same FM 106.0 Hz. After the connection is successful, all the sounds of the device will
be transmitted to the original car speakers through FM transmission.
After selecting this mode, the volume icon will change to an FM transmission icon
【 】, and the volume cannot be adjusted on this device, so the volume must be
adjusted on the original car.
(Not using the original power cord may result in deterioration of the FM transmission
signal or loss of function.)
To Next Page
