Hikmicro E03 - Viewing Device Information; Technical Support; About Calibration

English
12
displayed in the main interface.
Viewing Device Information
Go to Local Settings > Device Settings > About to view
the device information.
Setting Date and Time
Go to Local Settings > Device Settings > Time and
Date to set the time and date, and press to save
and exit.
Restoring Device
Go to Device Settings > Device Initialization > Restore
Device to initialize the device and restore default
settings.
Initializing Storage
Go to Device Settings > Device Initialization > Format
Storage to initialize the storage.
If there are files, make sure that the files has been
backed up before formatting. Once the storage is
initialized, data and files cannot be recovered.
Save Operation logs
The device can collect its operation logs and save in
the storage only for troubleshooting. You can turn
on/off this function in Local Settings > Device
Settings > Save Logs.
When troubleshooting is necessary, you can connect
the camera to PC using the supplied USB cable, and
select USB Drive as the USB mode on camera to
export the operation logs (.log files) in the top
directory of the camera, send them to HIKMICRO
support team.
Technical Support
support@hikmicrotech.com
https://www.hikmicrotech.com/en/contact-us.html
About Calibration
Please contact the local dealer for the information on
maintenance points. For more detailed calibration