Power On/Off
Hold for over three seconds to turn on the
camera. It may take some time until the camera is
ready for using. Hold for about three seconds to
power off the device.
Press once to turn off screen display (manual
sleep), and press again to wake the camera up.
Tap , and go to Device Settings > Auto Power-off
to set the automatic shutdown time.
Setting Language
Select , and go to Device Settings > Language to
set the menu language.
Charge Camera
The camera is equipped with a built-in battery. It is
recommended to charge the camera with the
included USB cable and the Type-C interface on
camera. Do not use the USB-C to USB-C cable of
other manufacturers.The power adapter (not included)
should meet the following standards:
Output Voltage/Current: 5 VDC/2 A
Power Output: 10 W
The power delivered by the charger must be
between min 8 Watts required by the radio
equipment, and max 10 Watts in order to achieve
the maximum charging speed.
If the camera is not in use for an extended period
and is over-discharged, it is recommended to
charge for at least 30 min before powering it on.
It is recommended to use the USB cable included
in the package for both charging and data
transfer.
To Next Page
Loading...
