Indicates a hazardous situation which, if not avoided, will or
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
These instructions are intended to ensure that user can use the product correctly to avoid
danger or property loss. Please read all the safety information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation
Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure occurred,
you need to return the device to the factory with the original wrapper. Transportation
without the original wrapper may result in damage on the device and the company shall
not take any responsibilities.
DO NOT drop the product or subject it to physical shock. Keep the device away from
magnetic interference.
Power Supply
Input voltage should meet the Limited Power Source (5 VDC, 2 A) according to the
IEC62368 standard. Please refer to technical specifications for detailed information.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire
hazards caused by overload.
Use the power adapter provided by a qualified manufacturer. Refer to the product
specification for detailed power requirements.
To Next Page
Loading...
Need help?
General
