Thermal Telescope User Manual
5
Auto Power Off
Set the auto power off time for your device, and then the device will automatically shut down as
the set time.
Steps
1. Hold to go to the menu.
2. Rotate the wheel to select , and press to select the auto power off time as required.
3. Hold to save and exit.
Note
● See the battery icon for the battery status. means the battery is fully charged, and
means that the battery is low.
● When the low power note shows, charge the battery.
● The auto power off countdown will start again when the device exits standby mode, or the
device is restarted.
2.4 Menu Description
When the device is turned on, hold to show the menu.
In the menu, you can press and to select functions, press to configure the selected
function, and hold to exit the menu.
Figure 2-6 Menu Interface
To Next Page
Loading...
Need help?
General
