Hikmicro Falcon FQ25 User Manual

Thermal Telescope User Manual
12
3.12 Set Brand Logo
You can add brand logo on the live view interface.
Steps
1. Hold to show the menu.
2. Select .
3. Press to enable Brand Logo.
4. Hold to save the settings and exit.
Result
The brand logo is displayed at the bottom right of the image.
Figure 3-2 Brand Logo Display
Note
After enabling this function, the brand logo only displays on the live view interface, captures and
videos.

Hikmicro Falcon FQ25 Specifications

General

Brand	Hikmicro
Model	Falcon FQ25
Category	Thermal cameras
Language	English