Hikmicro LYNX Pro Series - Menu Description; App Connection

Thermal Monocular User Manual
7
Hold to show the menu.
Go to Advanced Settings, and press or to select
.
Press to enable auto screen off.
Hold to save settings and exit.
You can do one of the following methods to enter the standby mode
when the display is turned on:
 Tilt the device downwards more than 70°.
 Rotate the device horizontally more than 75°.
 Keep the device still and do not move it for 5 minutes.
You can do one of the following methods to wake up the device when
the display is turned off:
 Tilt the device downwards from 0° to 60° or upwards .
 Rotate the device horizontally from 0° to 75°.
 Press to wake up the device.
2.4 Menu Description
In the live view interface, hold to show the menu.
Figure 2-2 Menu Description
2.5 App Connection
Connect the device to the HIKMICRO Sight app via hotspot, then you can
capture picture, record video, or configure parameters on your phone.
Steps