Hikmicro LYNX Pro Series - Preparation; Cable Connection; Power On;Off

Thermal Monocular User Manual
5
2 Preparation
2.1 Cable Connection
Connect the device and power adaptor with a type-C cable to power on the
device. Alternatively, connect the device and PC to export files.
Figure 2-1 Cable Connection

Charge the device for more than 5 hours before first use.

The charging temperature should be from 0 °C to 45 °C (32 °F to
113 °F).
2.2 Power On/Off
Power On
When the device is connected to cable or the battery is enough, hold to
power on the device.
Power Off
When the device is turned on, hold to power off the device.