Hikmicro LYNX Pro Series - Image Settings; Adjust Diopter; Adjust Focus

Thermal Monocular User Manual
11
3 Image Settings
You can set palettes, brightness, scenes, FFC (flat field correction), and
DPC (defective pixel correction) to display the better image effect.
3.1 Adjust Diopter
Make sure the eyepiece covers your eye and aim at the target. Adjust the
diopter adjustment knob until the OSD text or image is clear.
Figure 3-1 Adjust Diopter
When adjusting diopter, DO NOT touch the surface of lens to avoid
smearing the lens.
3.2 Adjust Focus
Slightly rotate the focus ring to adjust the focus of the objective lens.
Figure 3-2 Adjust Focus