Thermal Monocular User Manual
20
4 Measure Distance
The device can detect the distance between the target and the observation
position.
Before You Start
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.
Steps
Hold to show the menu.
Go to Advanced Settings, and or to select . Press
to enter the setting interface.
Set the parameters for the target.
Press to enter the setting interface. Press or to
select the target from Deer, Grey Wolf, Brown Bear, and Custom.
Press to enter target height configuration interface. Press
to select digit, and press or to change the number.
The available height ranges from 0.1 m to 9.0 m.
Hold to save the settings and return to the distance
measurement interface.
Align the center of top mark with the edge of target top, and press
to confirm.
Align the center of bottom mark with the edge of target bottom, and
press to confirm.
Result
The right top of the image displays the distance measurement result and
the height of the target.
To Next Page
Loading...
