Hikmicro LYNX Pro Series - Upgrade Device

Thermal Monocular User Manual
9
Figure 2-3 Check Firmware Status
(Optional) If the firmware is not the latest version, upgrade the device.
See Upgrade Device.
Upgrade Device via HIKMICRO Sight
Steps
Open HIKMICRO Sight app and connect your device to the app.
Tap the upgrade prompt to enter the firmware upgrade interface.
Tap Upgrade to start upgrade.
The upgrading operation may vary due to app updates. Please take the
actual app version for reference.
Upgrade Device via PC
Before You Start
Please get the upgrade package first.
Steps
Hold to show the menu.
Go to Advanced Settings, and select Function Settings.
Press or to select , and press to enter the
configuration interface.
Press or to select USB Flash Drive.
Connect the device to your PC with cable.
Open the detected disk, copy the upgrade file and paste it to the root
directory of the device.
Disconnect the device from your PC.