Hikmicro LYNX Pro Series - Page 37

Thermal Monocular User Manual
34
Regulatory Information
These clauses apply only to the products bearing the corresponding mark
or information.
EU Conformity Statement
This product and - if applicable - the supplied accessories
too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the
Directive 2014/30/EU (EMCD), Directive 2014/35/EU (LVD),
Directive 2011/65/EU (RoHS), Directive 2014/53/EU.
Hereby, Hangzhou Microimage Software Co., Ltd. declares
that this device (refer to the label) is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
https://www.hikmicrotech.com/en/support/download-
center/declaration-of-conformity/
Frequency Bands and Power (for CE)
The frequency bands and transmitting power (radiated
and/or conducted) nominal limits applicable to the
following radio equipment are as follows:
Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz), 20 dBm
For the device without a supplied power adapter, use the
power adapter provided by a qualified manufacturer. Refer
to the product specification for detailed power
requirements.
For the device without a supplied battery, use the battery
provided by a qualified manufacturer. Refer to the product
specification for detailed battery requirements.