Thermal Monocular User Manual
9
Chapter 3 Image Settings
You can set palettes, brightness, scenes, FFC (flat field correction), and DPC (defective pixel
correction) to display the best image effect.
3.1 Adjust Diopter
Make sure the eyepiece covers your eye and aims at the target. Adjust the diopter adjustment
knob until the OSD text or image is clear.
Note
● When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens.
● This function varies according to different camera models.
Figure 3-1 View the Target
To Next Page
Loading...
