Hikmicro OWL Series User Manual

Thermal Monocular User Manual
18
5.3 Burning Prevention
This function can prevent the detector of the thermal channel from being burned. When this
function is enabled, the shield will close if the grey scale of the detector reaches a certain value.
Steps
1. Hold to show the menu.
2. Select , and press to enable or disable the burn-prevention function.
Note
Avoid direct sunlight and enable the Burning Prevention function to reduce the risk of sensor
damage from the heat.
5.4 Capture and Video
5.4.1 Capture Picture
In the main live view interface, press to capture picture.
Note
When capturing succeeds, the image freezes for 1 second and a prompt shows on the display.
For exporting captured pictures, refer to Export Files.
5.4.2 Record Video
Steps
1. In the main live view, hold and start recording.

Hikmicro OWL Series Specifications

General

Aperture	F1.0
Record Video	Yes
Capture Snapshot	Yes
Wi-Fi	Yes
Lens	19 mm
Detector Type	Uncooled VOx microbolometer
Pixel Interval	17 μm
Response Waveband	8μm - 14μm
NETD	<40mK
Digital Zoom	1 ×, 2 ×, 4 ×, 8 ×
Frame Rate	50 Hz
Battery Type	Lithium rechargeable battery
Operating Temperature	-20 °C to 55 °C (-4 °F to 131 °F)
Thermal Sensitivity	<40mK