Hikmicro OWL Series - Power On;Off; Menu Description

Thermal Monocular User Manual
5
2.2 Power On/Off
Power On
When the device is connected to cable or the battery is enough, hold for 2 seconds to power
on the device.
Power Off
When the device is turned on, hold for 2 seconds to power off the device.
Note
● Power-off countdown will appear when you power off the device. You can press any key to
interrupt the countdown and cancel the power-off.
● Automatic low battery power-off cannot be canceled.
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Hold to go to the menu.
2. Select , and press to select the auto power off time as required.
3. Hold to save and exit.
Note
● See the battery icon for the battery status. means the battery is fully charged, and
means that the battery is low.
● When the low power note shows, charge the battery.
● The auto power off will start again when the device exits standby mode or the device is
restarted.
2.3 Menu Description
When the device powers on, hold to display the menu.