SC5000 Series Smart Camera Quick Start Guide
5
Note
You should refer to the table above and the label attached to the power and I/O cable to wire the
device.
3.2 Indicator
The device has five indicators, including PWR, LNK, ACK, U1 and U2 indicators. Read following
sections to get the indicator status of the device.
●
PWR indicator: It is the power indicator, and it is solid blue when the device operates normally.
●
LNK indictor: It is the network connection indicator, and it is solid green when the network
transmission is normal.
●
ACK indictor: It is the network transmission indicator, and it is flashing yellow when the network
transmission is normal. The flashing speed is related with data transmission speed.
●
U1 indicator: It is user indicator 1. The indicator is solid red after the device creates Profinet
communication.
●
U2 indicator: It is user indicator 2. The indicator is slow flashing blue after the device is powered
on.
Table 3-2 Indicator Status Definition
To Next Page
Loading...
