HikRobot SC5000 Series - Output Signal

SC5000 Series Smart Camera Quick Start Guide
16
Table 7-1 Input Electrical Feature
Parameter Name
Parameter Symbol
Value
Input Logic Level Low
VL
1.5 VDC
Input Logic Level High
VH
2 VDC
Input Falling Delay
TDF
81.6 μs
Input Rising Delay
TDR
7 μs
7.2 Output Signal
The device's Line 3/4/5 is opto-isolated output, and their internal circuit is as follows.
Note
● The output voltage ranges from 5 VDC to 30 VDC.
● The maximum current is 200 mA.
● Do not directly connect with inductive load (e.g. DC motor, etc.) when outputting.
Figure 7-3 Internal Circuit of Output Signal
Figure 7-4 Output Logic Level
Note
If the external voltage and resistance change, the corresponding current of output signal and
output logic level low may differ.