What to do if HikRobot CameraLink live view is normal, but camera cannot be triggered?
If the live view is normal but the HikRobot Digital Camera cannot be triggered, it might be due to incorrect I/O wiring or the trigger mode not being enabled. First, check whether the I/O wiring is correct for the corresponding triggering mode. Second, verify that the camera trigger mode and related trigger signal input are functioning correctly.
What to do if HikRobot CameraLink Digital Camera live view and trigger signal are normal, but camera cannot get the image required by the algorithm?
If the live view and trigger signal are normal, but the HikRobot Digital Camera cannot get the image required by the algorithm, the image output format may not match. Confirm the image format required by the algorithm and adjust the image output format of the camera in the client software.
Why is my HikRobot CameraLink Digital Camera not found when running the client?
If the HikRobot Digital Camera is not found when running the client, this could be because the camera hasn't started up correctly, or there's a CameraLink cable connection issue. Here are some things you can check: 1. Check the camera power wiring and observe the LED indicator. 2. Check whether the CameraLink cable is normally connected via a serial port tool. 3. Try reinstalling the client.
What to do if HikRobot Digital Camera indicator shows solid blue, but frame grabber software cannot generate image?
If the HikRobot Digital Camera indicator shows solid blue, but the frame grabber software cannot generate an image, it could be due to incorrect parameter settings of the frame grabber software or because the camera is in trigger mode. Try the following: 1. Check whether the parameter settings of the frame grabber software are set correctly. 2. Disable trigger mode.
How to fix black live view on HikRobot CameraLink Digital Camera?
If the live view on your HikRobot Digital Camera is black, the aperture might be closed. Open the aperture to resolve this issue.
Ensures correct product usage to avoid danger or property loss.
Details safe practices for connecting and using the power supply unit.
Guides on how to set the image line rate for the camera, affecting frame rate.
Describes the four trigger modes and their parameter settings.
Lists and describes five external trigger source types: Software, Hardware, Shaft Encoder, Frequency Converter, Frame Grabber.
Explains how to configure the camera for software trigger mode.
Guides on setting up hardware trigger using Line 0 or Line 3 inputs.
Details how to configure the camera to use shaft encoder signals as triggers.
Explains how to use the frequency converter for trigger signal generation.
Guides on setting up triggers using the frame grabber.
Shows which trigger parameters are supported for different trigger modes.
Explains how to set the number of frames captured per trigger signal.
Details how to set a delay between trigger signal reception and camera response.
Guides on setting trigger activation to rising edge or falling edge.
Explains how to configure the shaft encoder counter and its modes.
Details how to set a debouncer time to prevent false triggers from signal bounce.
Explains how to view and set the camera's resolution parameters.
Guides on setting a Region of Interest to focus image processing.
Details how to enable horizontal image reversal.
Explains how to choose the appropriate pixel format for image data.
Guides on enabling and using test patterns for diagnostics.
Explains how to set exposure time and different auto exposure modes.
Guides on setting analog gain values for image brightness.
Explains how to set digital gain to further increase image brightness.
Details how to adjust white balance for accurate color rendition.
Offers solutions when the camera is not detected by the client software.
Addresses problems with the frame grabber software not generating images.
Solves issues related to black live view or inability to trigger the camera.
General| Brand | HikRobot |
|---|---|
| Model | CameraLink |
| Category | Digital Camera |
| Language | English |
To Next Page
