HikRobot CameraLink - Connecting to MVS Software; Establishing Camera Link Connection

CameraLink Line Scan Camera·User Manual
9
Figure 4-1 Installation Interface
3. Click Start Setup.
4. Finish the installation according to the interface prompts.
4.4 Connect Camera to MVS Client Software
Steps:
1. Click in Camera Link of device list to search the device.
The refresh process may take a few minutes, please wait patiently.
2. Right click the device, and click Bauderates Setting to set baud rate according to actual
demand.
3. Double click the device, or click to connect the device to the MVS client software.