HikRobot CameraLink - Chapter 2 Interface and Indicator; Interface Description

CameraLink Line Scan Camera·User Manual
3
Chapter 2 Interface and Indicator
2.1 Interface Description
For different models of cameras, they all have a 12-pin Hirose connector, and pin definitions
are as follows.
Figure 2-1 12-pin Power and I/O Interface
Table 2-1 Description
No.
Signal
I/O Signal Source
Description
1
GND
--
Camera power supply ground
2
DC_PWR
--
Camera power supply
3
IO_IN0_P
Line 0+
Differential input 0+
4
IO_IN0_N
Line 0-
Differential input 0-
5
GND
--
Signal ground
6
IO_IN1_P
Line 3+
Differential input 1+
7
IO_IN1_N
Line 3-
Differential input 1-
8
Reserved
9
IO_OUT0_P
Line 1+
Differential output 0+
10
IO_OUT0_N
Line 1-
Differential output 0-