HikRobot CameraLink - Chapter 10 Other Functions; Device Control

CameraLink Line Scan Camera·User Manual
55
Chapter 10 Other Functions
10.1 Device Control
In the Device Control attribute, you can view device information, edit device name, enable
heartbeat mode, etc.
Table 10-1 Device Control Parameter Description
Parameter
Read/Write
Description
Device Scan Type
Read only
It is the scan type of the sensor.
Device Vendor Name
Read only
It is the name of device manufacturer.
Device Model Name
Read only
It is the device model.
Manufacture Info
Read only
It is the manufacturer information.
Device Family Name
Read only
It is the device series name.
Device Version
Read only
It is the device version.
Device Firmware Version
Read only
It is the device firmware version.
Device Serial Number
Read only
It is the device serial number.
Device User ID
Read and write
Device name and it is empty by default. You can
set according to your preference.
 If Device User ID is empty, the client
software displays the device model.
 If you set it, the client software displays the
Device User ID you set.
Maximum Device
Response Time
Read only
It is the device’s max. response time.
Device Manifest Table
Address
Read only
The endianness of image data.
Device SBRM Address
Read only
It is address of the technology specific bootstrap
register map.