HikRobot CameraLink - Transport Layer Control

CameraLink Line Scan Camera·User Manual
12
Attribute
Description
Image Format Control
You can view and set the device resolution, image reverse
function, pixel format, region of interest, test pattern, etc.
Acquisition Control
You can view and set the device acquisition mode, line rate,
trigger mode, exposure mode, etc.
Analog Control
You can view and set the device gain, black level, Gamma
correction, etc.
Color Transformation
Control
You can view and set the device color transformation related
parameters like hue and saturation.
LUT Control
You can view the Look-Up Table (LUT) and set its index and
value.
Encoder Control
You can set encoder control to convert source signal of external
trigger into internal signal.
Frequency Converter
Control
You can set frequency converter control to convert external
signal of different frequencies into internal signal.
Shading Correction
You can set shading correction to correct shade.
Digital IO Control
You can set the different input and output signals.
Transport Layer Control
You can set the parameters of transport layer of the device.
User Set Control
You can save or load the device’s parameters. You can set the
default parameter when running the client software.
For different models of cameras, the specific attributes may differ, and the actual product you
purchased shall prevail.
5.3 Transport Layer Control
The camera’s tap geometry should match with that of frame grabber, and inconsistent parameters
may lead to image exception.