HikRobot CameraLink - MVS Client Software; Installing MVS Client Software

CameraLink Line Scan Camera·User Manual
8
Frame Grabber Parameters
Camera Parameters
Camera Sensor Geometry Setting
Tap Mode
Table 4-2 Parameters of Matrox Frame Grabber
Frame Grabber Parameters
Camera Parameters
Pixel Clock Frequency
Pixel Clock
Cameralink config
Configuration Mode
Taps
Tap Number
Tap Configuration
Tap Mode
4.3 Install MVS Client Software
MVS client software is used to connect the camera, set its parameters, etc.
 The MVS client software is compatible with 32/64-bit Windows 7/10 operating systems.
 Software version in this manual is V3.1.0. If other versions are used, the graphic user interface
may differ.
 You can download Windows version client software from en.hikrobotics.com. For other
versions of client software, please contact technical support personnel via e-mail:
tech_support@hikrobotics.com to obtain it.
Steps:
1. Double click MVS installation package to install the client.
2. Read the Terms of the License Agreement and check it.