CameraLink Line Scan Camera·User Manual
54
Figure 9-23 Set LUT
9.14 Set Shading Correction
For different models of cameras, the shading correction function may differ, and the actual product
you purchased shall prevail.
The camera currently supports PRNUC (Photo-response Non-Uniformity Correction) function that
eliminates vertical line on the images. You can set it as shown below.
Steps:
1. Click Shading Correction.
2. Select PRNUC Correction as Shading Selector.
3. Click Execute of Activate Shading.
4. Enable PRNUC Enable to enable correction function.
Figure 9-24 Set Shading Correction
You can also enable PRNUC Target Enable to enable PRNUC target correction, and set PRNUC
Target R, PRNUC Target G or PRNUC Target B according to actual demands.
To Next Page
Loading...
