HikRobot CameraLink - Appendix Command List

CameraLink Line Scan Camera·User Manual
65
Appendix Command List
The commands listed in the command list below are common ones only. For other commands,
please contact technical support personnel via e-mail: tech_support@hikrobotics.com for detailed
information.
Table Appendix-1 Command List
Parameter
Command
Value
Description
DeviceReset
w DeviceReset
1
Reboot device. Eg. w
DeviceReset 1.
Width
r Width
Read width.
Height
w Height
Value
Set the height. Eg. w Height
2000.
r Height
Read the height.
Reverse X
w ReverseX x
x:
0—disable
1—enable
Set image reverse X.
Eg. w ReverseX 1.
r ReverseX
Read image reverse X.
Reverse Scan
Direction
w ReverseScanDirection
x
x:
0—forward direction
1—reverse direction
Set scan direction. Eg. w
ReverseScanDirection 1.
r ReverseScanDirection
Read scan direction.
PixelFormat
w PixelFormat x
x:
0x1080001--momo8
0x1100003--mono10
0x1100005--mono12
0x02180014--RGB 8
Set pixel format. Eg. w
PixelFormat 0x1080001.
r PixelFormat
Read pixel format.
Note: the returned value is
decimal system and it needs
to be converted to
hexadecimal.